How To Secure Netgear Wireless Router..

To enable security please follow the steps :




1.Log in to router web interface using http:\\192.168.0.1 or http:\\192.168.1.1 (depending upon the ip address of the router)

2.username : admin ,Password : password (unless changed)

3.Click wireless settings under setup

4.Make security as WEP

5.Security type : automatic

6.Encryption strength : 64 bit

7.Put a check mark on key 1 & typein any 10 digit key & apply the settings.

8.Then from your wireless computer try connecting to your wireless network which will prompt you to enter the wep key.Just enter the 10 digit key & confirm the same and click connect.

9.Now you have enabled wep for your wireless network and it's secure.